NOTE

• The settings you can specify are as follows.

-[Color Saturation/Proportion of Color]

Normally scan with the default values (Color Saturation: 2, Proportion of Color: 2), but change the settings when you want to scan a color document as a black- and-white document.

y Color Saturation: change the setting towards "High" when you want to scan a color document with low color saturation as a black-and-white document.

y Proportion of Color: change the setting towards "High" when you want to scan a colordocument with a low proportion of color as a black-and-white document.

-[Mode in case of binary]

Select the scanning mode when a page is detected as black and white.

-[Brightness]

This setting adjusts the brightness when [Advanced Text Enhancement] (only for Windows) or [Advanced Text Enhancement II] is selected with the Black and White mode. For other modes, the brightness is set from the [Brightness] tab. The brightness setting for other modes is dependent on the following settings. Windows: [Brightness] under [Brightness] tab

Mac OS X: [Brightness] under [Brightness/Contrast]

-[Contrast]

This setting adjusts the contrast when [Advanced Text Enhancement II] is selected with the Black and White mode. For other modes, the contrast is set from the [Brightness] tab. The contrast setting for other modes is dependent on the following settings.

Windows: [Contrast] under [Brightness] tab

Mac OS X: [Contrast] under [Brightness/Contrast]

Contents

Back

 

Previous Page Next Page

Paper Size Settings

This section describes the procedure for selecting the size for scanning.

Under Windows

1Click the [Basic] tab → click the page size in [Page Size].

67