Feeding in the Bypass Mode
When scanning multiple page documents that are fastened together, such as invoices, place the documents so that the edge that is fastened together is facing down.
1Switch the feed selection lever to 
(Bypass).
2Adjust the document guides to fit the width of the document to be scanned (See p.24).
3Place the document with the reverse side facing you, and the top of the document facing down (See p.24).
Back |
|
4Use the application software to start scanning.
IMPORTANT
After you finish scanning, close the document feed tray and the document eject tray to prevent damage to the scanner while it is not being used.
Placing Cards
1Switch the feed selection lever to 
(Bypass).
CAUTION
• When scanning cards, make sure to set the feed selection lever to 
(Bypass).
• The maximum number of cards that can be scanned at a time is three.
2Adjust the document guides to fit the width of the card to be scanned (See p.24).
26