Manuals / Canon / Computer Equipment / Scanner

Canon DR-5060F manual System Requirements

Models: DR-5060F

1 92

Download 92 pages 34.67 Kb

Page 22

System Requirements

To use the DR-5060F, you need the following items in addition to the standard accessories:

•Computer

•SCSI card

•SCSI cable

•Application

•Camera unit

•Microfilm

MEMO

●For details on installation of the main unit, see “About the Installation Location” (P. 7) under “Safety Precautions.”

●The driver may not function properly depending on the application you are using.

●Select a computer, operating environment and SCSI card to suit the driver application you are going to use.

●The SCSI connector used for this unit is a half-pitch 50-pin (pin type) connector. Check the shape of the connector for the SCSI card on the computer or the SCSI device to be connected to the computer, and prepare a SCSI cable that is compatible with this unit.

20System Requirements

Image 22

Canon DR-5060F manual System Requirements

Contents

Instructions FCC Regulations For 120V models Introduction Scanner This UnitFilmer Contents Chapter Daily Cleaning Chapter TroubleshootingSpecifications Options Consumables Index Safety Precautions Daily maintenanceSafety Precautions About the Installation Location About the Power Supply CarryingChapter Features of DR-5060F Packaging What’s in the Box? About DR -5060FNames and Functions of Parts Front viewInside with upper unit open Rear viewOperation panel Remaining film indicatorFunction keys Count Only key Backup keySpace/Trailer key Clear/Stop keyFeeding Option key Indicator lampsStart key Brightness keyDocument eject support plate Removable trayFunction key labels About the Camera Unit Preparation Before Use System Requirements Connecting the Scsi Cable Connecting to a ComputerPreparation Bef ore Use Setting the Scsi ID and Terminator Setting the Scsi IDSetting the terminator Connecting the Power Cord and Ground Cable Connecting the power cordPress the release notch to open the camera unit’s cover Handling the Camera UnitLoading Film Take the microfilm out of its caseClose the left cover taking care not to nip the film Preparation Bef ore Use Affixing the Index Label Loading the Camera Unit in the DR-5060F Push the camera unit down onto the main unitRemoving the Camera Unit Removing Film Press the release notch to open the cover on the rightRemove the film Store the film in its case Affixing the Document Guide Labels Preparing for Paper Feeding and EjectionDocument tray extension Open the extension wire Document eject tray extensionDocument eject support plate Paper Feed Adjustment Removable trayTo turn this unit ON, press the power switch Turning the Power ON/OFFTurning the Power on Turn the computer onTurning the Power OFF Turn the computer OFF before you turn the scanner OFFPreparing Documents Backup key out Scanner Only mode Checking the Operation ModeBackup key lit Backup mode Backup key blinking Filmer Only modeCount Only mode Count Only key lit Count Only modeWhen counting ends, press the Count Only key to cancel Preparing DocumentsAbout Documents Types of DocumentsDocument Loading Precautions Setting Scan Conditions Selecting the Feeding Option Remote Semi-Auto Is lowered when scanning of all pages in the document endsSemi-Auto Inserted first into the scannerAuto Sensor Manual Insert the document one page at a time To end scanning, press the Stop keyFunction Key Settings Press the or key to adjust the paper thickness Manual Thickness AdjustmentPress the blinking function key again Fixed Thickness Mode Double Feed DetectionFilm Density Restore Memorized SettingImprinter Odometer IndicationSetting in the User Mode User Mode Setup ItemsLeader feed setting Endorser stamp mode settingSpace feed setting Trailer settingWhen the final letter of the user mode setting is a number How to Set the User modeSelect the user mode address using the or key When the final letter of the user mode setting isTroubleshooting When the Scanner is Not Recognized Paper Jam in the Paper Eject Section TroubleshootingRemoving Paper Jams Eject tray extension if it is openPage Paper Jam in the Feed Section Check the intermediate unit for jammed paperPress the open/close button, and lift up the feed unit Remove the jammed paper from the feed sectionGently close the upper unit Press the upper unit down firmly on both sides to close itRemoving the Intermediate Unit Attaching the Intermediate Unit Push the intermediate unit downCondition Paper jam has occurred Paper Feed TroubleCondition Double feed cannot be detected Troubleshooting Cause Scan conditions are inappropriate When the Scanned Image is Not NormalCause Scanning glasses and rollers on the scanner are dirty Cause Driver or application does not run correctlyWhen an Error Code is Displayed Cause Document was skewed Cause Endorser option connection errorCause Lamp has reached the end of its service life Cause Scanner paper jamAbout the Remaining Film Warning Page Daily Cleaning Daily Cleaning Cleaning the Main UnitCleaning the Scanning Glasses and Rollers Daily CleaningOpen the feed unit Use a clean, dry cloth to wipe the scanning glasses Lower the lever Press this part Fit into Deeper Two grooves Memo Cleaning the Camera Unit Power CordImprinter Guide Plate Specifications SCSI-IIImprinter Camera unitEndorser ED600 Barcode DecoderAuto Backup key IndexSCSI-ID User mode setting Page PUB.CE-IE-986