Function Key Settings
Twelve function keys are located at the top of the operation panel. The following functions can be registered to these keys. Pressing a specific key calls up the function registered to that key.
1
2
3
4
Space/Trailer
5
6
Function keys
Backup
E FILM F
Count Only
New File
Scanner
Feeding Option
A
Manual
Auto
The following settings can be registered to the function keys. Functions are registered to function keys in the application. For details on how to register settings to function keys, refer to the separate “ISIS/TWAIN Driver Instructions” or “Scanning Utility 5060 Instructions.”
● Manual Thickness Adjustment | (See P. 53) |
● Fixed Thickness Mode | (See P. 54) |
● Double Feed Detection | (See P. 54) |
● Imprinter | (See P. 55) |
● Film Density | (See P. 55) |
● Odometer Indication | (See P. 55) |
● Page Address Indication | (See P. 55) |
● File Address Indication | (See P. 55) |
● Restore Memorized Setting | (See P. 55) |
MEMO
●Default settings are as follows:
Function key 1: Manual Thickness Adjustment
Function key 2: Fixed Thickness Mode
Function key 3: Double Feed Detection
Function key 4: Not registered
Function key 5: Not registered
Function key 6: Not registered
●Details of functions registered to each function key are saved on the scanner. Note that these details will revert to their defaults if the scanner is submitted for repair.
52Setting Scan Conditions
