Canon DR-5060F manual Camera unit, Endorser ED600, Imprinter, Barcode Decoder, Patch Code Detector

Dimensions
with tray closed	447 (H) x 535 (W) x 671 (D) mm
	[17.5 (H) x 20.8 (W) x 26.1 (D) in]
with tray open	486 (H) x 535 (W) x 839 (D) mm
	[18.9 (H) x 20.8 (W) x 32.7 (D) in]
Weight	Approx. 48 kg (105.8 lb.)
Power requirement	AC 220-240V (50/60 Hz), 0.6A (max)
	AC 120V (60 Hz), 1A (max)
Power consumption	220 W
Noise	Less than 70 dB
Operating environment	Temperature: 10° C to 32.5° C (50° F to 90.5° F)
	Humidity: 20% to 80%RH

Options

Camera unit 57X

This camera unit is for photographing documents in the duplex mode with the 1/57 magnification lens.

Camera unit 24X

This camera unit is for photographing documents in the simplex mode with the 1/24 magnification lens.

Endorser ED600

Attached on the main unit, this endorser stamps an 8-digit number and any specified characters on the rear side of the document after it is scanned.

Imprinter 5000

Attached inside the main unit, this imprinter prints characters such as counter numbers, alphabet characters and symbols on the front side of the document while it is being scanned.

Barcode Decoder 5000

This control board is mounted inside the main unit, and reads and recognizes bar codes in the document.

Patch Code Detector

This control board is mounted inside the main unit, and reads and recognizes patch codes in the document.

NOTE

The bar code decoder cannot be mounted at the same time as the patch code detector. For details, contact your place of purchase or a Canon service department.

Consumables

Microfilm CK III

●For details on options and consumables, contact your sales agent or a Canon service department.

●Specifications are subject to change without notice.

Specifications 85