Playback Images

• If you playback images and then go away without operating or turning off the camera, the LCD monitor will turn off automatically after half of the auto power-off time elapses. If the auto power-off function has been disabled, the image display will turn off automatically after 15 minutes.

•You can playback all the images in the current folder. To playback images in another folder, you must first select that folder (see step 1 on page 55).

•In any display format, you can protect the image (→p.119) or create a sound recording(→p.121).

P.Fn-30Enlarging the image

When P.Fn-30’s “Enlargement mode” is ON, you can view an enlarged portion of the image. For details, see “EOS DIGITAL Software User’s Manual.”

To enable this feature, set P.Fn-30 to ON for both shooting and playback. If P.Fn-30 is not ON during shooting, the image cannot be enlarged on the LCD monitor.

1

2

3

Reference image

Box

Playback the image and select the image to be enlarged. (→p.116)

•The image to be enlarged can be in any display format.

Enlarging the image.

•Hold down the <>, then press <>. Be sure

to hold down the <> button first.

s The image will be enlarged.

➡

Scroll around the image.

•Press the <> button.

s In the bottom right corner, the little box in the reference image shows where you are currently viewing.

•While pressing the <>button, turn the <> dial to scroll around the image to see another

magnified portion. Then let go of the <>

button.

s The portion within the little box will be enlarged on the LCD monitor.

7

Images Playback

While one image is enlarged, you cannot switch to another image. Press the

<> button to cancel the image enlargement, then proceed from step 1 .

117