MENU Registering Custom Function Groups
MENU Using a Custom Function Group
After following the procedure on the preceding page to register a Custom Function group, follow the procedure below to apply the Custom Function group’s settings to the camera.
1
2
3
On the menu, select “Personal Functions (P.Fn).”
•Press the <> button.
•While pressing the <> button, turn the <> dial to select <>.
•While pressing the <> button, turn the <> dial to select “Personal Functions (P.Fn).” Then let
go of the <> button.
Select “P.Fn 00.”
•While pressing the <> button, turn the <> dial to select “P.Fn 00.”
Select “Apply.”
•While pressing the <> button, turn the <>
dial to select “Apply.” Then let go of the <>
button.
s If the P.Fn 00 group has not been registered, “Apply” cannot be selected. First follow the procedure in “Set Custom Function Groups.” (→p.140)
Select the group number to be applied.
4 • While pressing the <> button, turn the <> dial to select
Then let go of the <> button.
s When you select a registered group number, the respective Custom Function settings (“Registered contents”) will be displayed. If you select an unregistered group number, the “Not registered” message will appear.
142