Troubleshooting Guide
ShootingNo images can be | The CF card is not properly installed. |
shot or recorded. | s Install the CF card properly. (→p.27) |
| The CF card is full. |
| s Use a new CF card or erase unnecessary images. (→p.27, 122) |
The battery is exhausted.
sRecharge the battery. (→p.22)
You did not focus well. (The focus confirmation light in the viewfinder blinked.) s Press the shutter button halfway and focus the subject. If you still
cannot focus properly, focus manually. (→p.74)
The LCD monitor The LCD monitor screen is dirty.
does not display a s Use a soft cloth to clean the screen.
clear image. The LCD’s service life has expired.
s Contact your dealer or Canon Service Center.
The image is out The lens focus mode switch is set to <> or <>.
of focus.s Set the lens focus mode switch to <>. (→p.26)
Camera shake occured when you pressed the shutter button.
s To prevent camera shake, hold the camera still and press the shutter button gently. (→p.29, 35)
The CF card The data in the CF card is damaged. cannot be used. s Format the CF card. (→p.126)
sUse the correct CF card. (→p.2, 3)
Image ReviewThe image cannot | The image is protected. |
be erased. | s Cancel the protection first. (→p.119) |
|
|
The date and time | The correct date and time has not been set. |
is wrong. | s Set the correct date and time. (→p.148) |
|
|
10
Reference
163