Installing and Removing the Battery
Installing the Battery
1
2
Detach the battery compartment cap.
•Grasp both sides of the cap and pull it off.
•The battery’s protective cover can be attached to the battery compartment cap. Keep the cap and cover in a safe place.
Insert the battery.
•Insert the battery and while pushing it in, turn the release handle as shown by the arrow.
1
Start You Before
If the battery’s rubber lining (for water resistance) is not clean, use a moist cotton swab to wipe it clean.
Rubber lining
Checking the Battery Level
After replacing the battery or before using the camera, check the battery level.
Turn the <
> switch to <
>.
s When the <
> switch is turned on, the battery check is executed automatically and the battery level is displayed on the top LCD panel.
: Battery level OK.
: Battery running low.
: Battery will be exhausted soon.
: Recharge the battery.
23