Canon ES20 manual Charging the Battery Pack, Install the battery pack NB-ES1L and charge it

Charging the Battery Pack

Install the battery pack NB-ES1L and charge it.

• It takes approximately 4 hours to bring a depleted battery pack to a full charge state (based on standard Canon testing criteria).

-We recommend recharging the battery pack in a temperature of 5 - 40 °C (41 - 104 °F).

-The charging time will vary depending on the ambient temperature and charge state.

•If Auto Power Down is set to [On], the printer will automatically turn off when powered by the battery if it is not used for five minutes or more.

1 Install the battery pack in the printer.

•For details on how to install, refer to Installing the Battery Pack (p. 73).

2 Connect the compact power adapter to the printer.

2 • The power lamp lights orange

while charging and turns off

once the battery pack is fully

charged.

• If the printer's power turns on

while charging the battery pack,

charging will stop. If the power

is turned off again, charging will

resume.

Situate the printer with at least 15 cm (6 in.) of free space in front and back and at least 10 cm (4 in.) of free space on the sides.

To power outlet

	15 cm
15 cm	(6 in.)
(6 in.)	10 cm
	(4 in.)

• Turn the printer power off and

turn it on again if the battery

does not start charging.

•For more connection details, refer to Placing/ Connecting the Printer (p. 22).

•Charging starts.

3 Disconnect the compact power adapter cord from the printer once charging is complete.

74 Using the Battery Pack (SELPHY ES2 only)