Infrared (IrDA) Wireless Printing (SELPHY ES2 only)

Print images transmitted from a mobile phone supporting infrared data communication (IrDA).

zThe mobile phone must have the following features.

Infrared data communication (infrared data communication port supporting IrDA)

Built-in camera capable of recording and saving JPEG images.

1 Check that no memory cards are inserted in the printer, no Bluetooth unit is attached, and the camera is not connected via USB cable.

2 Press to turn the printer's power on until the power lamp lights green.

3 Transmit an image from your mobile phone to the printer.

• Printing starts after data transmission is completed.

Within 20 cm (7.9 in.) (Do not place objects within this range.)

Effective range

Approx. 10 degrees (both top or bottom and left or right)

3 • Printing is done according to the setting value specified in [Print Settings]. Setting of each item must be done in advance (p. 46).

During transmission, the power lamp blinks green. If transmission is interrupted, the power lamp stops blinking and lights green. Check the message appearing on the mobile phone display if an error occurs.

Printing cannot be canceled by pressing during infrared printing.

If the transfer is not working well, reposition the mobile phone closer and directly in front of the infrared data receiver and reinitiate the transfer.

Note that the distance over which infrared signals can be transmitted and received varies according to the mobile phone model. For details on connection, refer to your mobile phone's manual.

56 Printing from a Mobile Phone (Wireless Printing)

Page 56
Image 56
Canon ES20 manual Infrared IrDA Wireless Printing Selphy ES2 only, Printing from a Mobile Phone Wireless Printing