Canon HF10 Reviewing and Deleting the Last Scene Recorded, After recording a scene

Video

2When you wish to resume recording, open the LCD panel.

Within less than 1 second, the indicator will return to green and the camcorder will be ready to record.

IMPORTANT

Do not disconnect the power source during standby mode (while the indicator is lit in orange).

NOTES

•If you close the LCD panel under some circumstances (for example while recording, while a menu is being displayed, or while the memory card slot is open), the camcorder may not enter

the standby mode. Check that the indicator changes to orange.

•The camcorder will shut off if left in standby mode for 10 minutes, regardless of the [POWER SAVE] setting

( 97). Press ON/OFF to turn on the camcorder.

•You can select the length of time until shut-off or turn off the Quick Start function with the [QUICK START] setting ( 97).

Reviewing and Deleting the Last Scene Recorded

Even in mode you can play back the last scene recorded in order to check it. You can also delete the scene while reviewing it.

( 26)

1If the joystick guide does not

appear on screen, press to display it.

If does not appear on the joystick guide, repeatedly push the joystick () toward [NEXT] to display it.

2Push the joystick () toward . The camcorder plays back the last scene (but without sound) and returns to record pause mode.

Deleting a Scene After Recording It

After recording a scene:

1Review the scene as described in the previous section.

2While reviewing the scene, select

() the icon and press .

3Select () [YES] and press .

NOTES

•Avoid any other operations on the camcorder while the scene is being deleted.

•You will not be able to delete the last scene if after the scene was recorded you changed the operating mode or turned the camcorder off.

38