Canon HF10 Protecting Photos, Copying Photos, Open the image selection screen, FUNC. Protect

Photos

FUNC.

[ MENU]

[ SYSTEM SETUP] [IMG QUALITY] Desired image quality*

FUNC.

*The number displayed at the bottom indicates the approximate number of images that can be recorded with the current quality setting.

TO CAPTURE THE STILL IMAGE

1Play back the scene containing the picture you want to capture.

2Pause the playback at the point you want to capture.

3 Press PHOTO fully.

NOTES

•The data code of the still image will reflect the date and time of recording of the original scene.

•A still image captured from a scene with lots of fast movement may be blurred.

• The still image will be recorded to the memory selected for recording

still images ( 33).

Protecting Photos

You can protect still images from accidental erasure.

( 26)

FUNC.

( 28)

1Open the image selection screen.

FUNC. [ PROTECT]

[ PROTECT] appears on the screen.

2Select ( ) the still image you want to protect.

3Press to protect the still image.

appears on the bottom bar and the image cannot be erased. Press

again to cancel the image protection.

4Repeat steps 2-3 to protect additional images or press FUNC. twice to close the menu.

IMPORTANT

Initializing the memory ( 33) will permanently erase all recordings, including protected still images.

Copying Photos

You can copy still images from the built- in memory to the memory card and vice versa.

( 26)

POINTS TO CHECK

Select in advance the memory from which you want to copy the still images ( 64).

70