Canon HF10 instruction manual Press, Frame-by-frame playback, To reverse, Skipping Scenes

Video

-Do not open the memory card slot cover.

-Do not disconnect the power source or turn off the camcorder.

-Do not change the position of the mode dial.

•You may not be able to play back with another AVCHD device the movies you recorded on the memory card with this camcorder. In such case, play back the movies on the memory card using this camcorder.

•You may not be able to play back with this camcorder movies recorded using another AVCHD device.

NOTES

•Depending on the recording conditions, you may notice brief stops in video or sound playback between scenes.

•You can press PLAYLIST on the wireless controller to switch between the original movies index screen and the playlist of the respective memory.

Special playback modes

To enter the special playback modes, you can use the buttons on the LCD panel or

wireless controller ( 16). There is no sound during the special playback modes.

Special playback mode

Initial mode

Operation on the camcorder ( )

or on the wireless controller ( )

Fast playback	Normal playback	,		: Press		or
		Press again to increase the playback speed
		5x → 15x → 60x the normal speed*
Slow playback	Playback pause	,		: Press		or
		Press again to increase the playback speed
			1/8 → 1/4 the normal speed
Frame-by-frame playback	Playback pause		: Press		or		to reverse/
		advance one frame or hold pressed for
		continuous frame-by-frame playback

Skipping Scenes:

To the beginning of the next scene	Normal playback	: Push the joystick (		)
		: Press
To the beginning of the current scene		: Push the joystick (		)
		: Press
To the previous scene		: Push the joystick (		) twice
		: Press	twice
End special playback	Any special	: Press	/
	playback mode	: Press

During some special playback modes, you may notice some anomalies (blocky video artifacts, banding, etc.) in the playback picture.

* The speed indicated on the screen is approximate.

40