Preparations

Preparing the Wireless Controller and

 

 

TO USE THE WIRELESS CONTROLLER

 

 

 

Accessories

 

 

 

First, insert the supplied lithium button battery CR2025 into the wireless controller.

Tab

1Press the tab in the direction of the arrow and pull out the battery holder.

2Place the lithium button battery with the + side facing up.

3Insert the battery holder.

Point the wireless controller at the camcorder’s remote sensor when you press the buttons.

You can rotate the LCD panel 180 degrees to use the wireless controller from the front of the camcorder.

NOTES

The wireless controller may not work properly when the remote sensor is situated under strong light sources or direct sunlight.

If the wireless controller does not work, check that [WL.REMOTE] is not set to

[ OFF ] ( 96). Otherwise, replace the battery.

22

Page 22
Image 22
Canon HF10 Accessories, Preparing the Wireless Controller, Place the lithium button battery with the + side facing up