Canon HF10 Basic Playback, Playing Back the Video, Scene index screen appears after a few seconds

Basic Playback

Playing Back the Video

( 26)

1Set the mode dial to .

2Turn on the camcorder.

The scene index screen appears after a few seconds.

3Move (, ) the selection frame to the scene you want to play back.

When you have recorded a large

number of scenes, press or to move between index screen pages.

4Press / or to begin the playback.

•Playback will start from the scene selected and continue until the end of the last scene recorded.

•Press / again to pause the playback.

•Press to stop the playback and return to the scene index screen.

TO SELECT WHICH SCENES TO PLAY BACK

After creating a playlist ( 58), you can switch between the original movies and the playlist you edited according to

your choice. You can also switch between the scenes or playlist recorded in the built-in memory and those recorded on the memory card.

1In the index screen, move ( ) the orange selection frame to the tabs on the top of the screen.

2Select ( ) the location of the scenes you want to play back.

3Return ( ) to the index screen to select the scene.

Original movies in the built-in memory*

Original movies on the memory card

Playlist in the built-in memory*

Playlist on the memory card

* only.

IMPORTANT

•Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss.

39