Canon HF10 Slideshow, Select the first still image of the slideshow, Index Screen

Photos

1If the joystick guide does not

appear on screen, press to display it.

2 Push the joystick () toward .

3Select () [ JUMP 10

IMAGES] or [ JUMP 100 IMAGES].

4Jump () the number of images

selected and press .

You can press again to hide the joystick guide.

IMPORTANT

•Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss.

-Do not open the memory card slot cover.

-Do not disconnect the power source or turn off the camcorder.

-Do not change the position of the mode dial.

•The following may not be displayed correctly.

-Images not recorded with this camcorder.

-Images edited on or uploaded from a computer.

-Images whose file names have been changed.

Slideshow

You can play a slideshow of all the still images.

1Select () the first still image of the slideshow.

2Press / to play back the still images one after another.

Press to stop the slideshow.

Index Screen

1Move the zoom lever toward W. The still images index screen appears.

2Select (, ) an image.

•Move the orange selection frame to the image you want to view.

•Repeatedly press or to extend the selection frame and browse through whole index pages.

3Press .

The index screen closes and the selected image is displayed.

TO SELECT WHICH STILL IMAGES TO PLAY BACK

You can switch between the still images recorded in the built-in memory and those recorded on the memory card.

1In the index screen, move () the orange selection frame to the tabs on the top of the screen.

2Select () the location of the still images you want to play back.

3Return () to the index screen to select the still image.

Still images in the built-in memory Still images on the memory card

64