Preparing the Wireless Controller and Accessories

First, insert the supplied lithium button battery CR2025 into the wireless controller.

[ OFF ] ( 49). Otherwise, replace the battery.

•When the optional Tele-converter or Wide-converter is attached to the camcorder, it may partially obstruct the remote sensor. Use the wireless controller from a different angle.

Accessories

Tab

1Press the tab in the direction of the arrow and pull out the battery holder.

2Place the lithium button battery with the + side facing up.

3Insert the battery holder.

Point the wireless controller at the camcorder’s remote sensor when you press the buttons.

NOTES

•The wireless controller may not work properly when the remote sensor is situated under strong light sources or direct sunlight.

•If the wireless controller does not work, check that [WL.REMOTE] is not set to

1Fasten the grip belt.

Adjust the grip belt so that you can reach the zoom lever with your index and middle fingers, and the START/STOP button with your thumb.

2Attach the optional shoulder strap.

23