Additional Information

Message

 

Explanation

 

PAPER JAM

The paper jammed during printing. Select [STOP] to cancel printing. After removing the

 

paper, set some paper again and retry printing.

 

 

 

 

 

INK ERROR

There is a problem with the ink. Replace the ink cartridge.

 

 

 

 

 

NO INK

The ink cartridge is not inserted or is out of ink.

 

 

 

 

LOW INK LEVEL

The ink cartridge needs to be replaced soon. Select [CONTINUE] to restart printing.

 

 

INK ABSORBER FULL

Select [CONTINUE] to resume printing. Consult a Canon Service Center (refer to the list

 

included with the printer) to replace the ink absorber.

 

 

 

• FILE ERROR

You attempted to print an image that was recorded with another camcorder, has a

• CANNOT PRINT!

different compression, or was edited on a computer.

 

 

 

COULD NOT PRINT X IMAGES

You attempted to use the print order settings to print X images that were recorded with

 

another camcorder, with a different compression or were edited on a computer.

 

 

SET PRINT ORDER

No still image on the memory card has been marked with a print order.

 

 

PRINT ORDER ERROR

You attempted to set more than 998 still images in the print order.

 

 

CANNOT TRIM

You attempted to trim an image that was recorded with another camcorder.

 

 

READJUST TRIMMING

You changed the [PAPER] settings after applying the trimming settings.

 

 

PRINTER ERROR

Cancel printing. Turn off the printer and turn it back on. Check the printer status. If the

 

error still persists, refer to the printer’s instruction manual and contact the appropriate

 

customer support center or service center.

 

 

 

 

PRINT ERROR

Cancel printing, disconnect the USB cable and turn off the printer. After a while, turn the

 

printer back on and reconnect the USB cable. Check the printer status.

 

When you are printing using the

button, check the print settings.

 

 

HARDWARE ERROR

Cancel printing. Turn off the printer and turn it back on. Check the printer status. If the

 

printer is equipped with a battery, it might be exhausted. In such case, turn off the

 

printer, replace the battery and turn it back on.

 

 

 

 

COMMUNICATION ERROR

The printer is experiencing a data transfer error. Cancel printing, disconnect the USB

 

cable and turn off the printer. After a while, turn the printer back on and reconnect the

 

USB cable. When you are printing using the

button, check the print settings.

 

Or, you attempted to print from a memory card that contains a large number of images.

 

Reduce the number of images.

 

 

 

 

 

 

CHECK PRINT SETTINGS

Current print settings cannot be used for printing with the

button.

 

 

INCOMPATIBLE PAPER SIZE

The paper settings of the camcorder conflict with the printer’s settings.

 

 

 

 

PRINTER IN USE

The printer is in use. Check the printer status.

 

 

 

 

PAPER LEVER ERROR

Paper lever error occurred. Adjust the paper selection lever to the proper position.

 

 

 

 

 

PRINTER COVER OPEN

Close the printer cover securely.

 

 

 

 

 

NO PRINTHEAD

No print head is installed in the printer or the print head is defective.

 

 

 

 

 

98