Video

NOTES

•When you wake up the camcorder from standby mode, the following settings will be changed automatically:

-Manual focus returns to automatic focus (AF).

-Manual exposure adjustment returns to automatic exposure.

-Zoom position returns to full wide angle W.

-Automatic backlight correction deactivates.

•The camcorder will shut off if left in standby mode for 10 minutes, regardless of the [POWER SAVE] setting

( 49). You can select the length of time until shut-off with the [ STANDBY

OFF] setting ( 49).

To restore the power if the camcorder

shut off, turn the switch toward MODE and release it, or turn the

switch to and back to ON again.

•If you perform any of the following actions while in standby mode (while the standby lamp is on), the camcorder will return to record pause mode.

-Change the position of the / switch.

-Turn the switch toward MODE.

Reviewing and Deleting the Last Scene Recorded

Even in mode you can play back the last scene recorded in order to check it. You can also delete the scene while reviewing it.

( 24)

1If the function guide does not

appear on screen, press to display it.

2Press to select .

•If does not appear on the function guide, repeatedly press to display it.

•The camcorder plays back the last scene (but without sound) and returns to record pause mode.

Deleting a Scene After Recording It

( 24)

After recording a scene:

1Review the scene as described in the previous section.

2While reviewing the scene, press

to select and press .

3Press to select [YES] and press

.

NOTES

•Avoid any other operations on the camcorder while the scene is being deleted.

•You will not be able to delete the last scene if after the scene was recorded you changed the operating mode or the camcorder was turned off.

36