Photos

TO RUN THROUGH THE STILL IMAGESPress or and hold it down to run quickly through the still images. TO SKIP 10 OR 100 STILL IMAGES

1If the function guide does not

appear on screen, press to display it.

2 Press to select .3Press or to select [ JUMP10 IMAGES] or [ JUMP 100 IMAGES].4Press or to jump the numberof images selected and press .

You can press again to hide the function guide.

You can also use the control dial.

IMPORTANT

Observe the following precautions while

the card access display ( ) appears on screen, and when the CARD access indicator is on or flashing. Failing to do so may result in permanent data loss.

-Do not subject the camcorder to vibrations or strong impacts.

-Do not remove the memory card.

-Do not disconnect the power source or turn off the camcorder.

-Do not change the position of the

/ switch or the operating mode.

The following may not be displayed correctly.

-Images not recorded with this camcorder.

-Images edited on or uploaded from a computer.

-Images whose file names have been changed.

Slideshow

FUNC.

( 26)

1 Press FUNC. .

2Press or to select

[ SLIDESHOW] and press . You can also use the control dial.3Press or to select [START]

and press .

Images are played back one after another.

Press FUNC. to stop the slideshow.

Index Screen1Press the W side of the zoom lever. The still images index screen appears.2Use the navigation buttons to select an image.

Move the green selection frame to the image you want to view.

You can also turn the control dial to run quickly through the index screens.

3Press .

The index screen closes and the selected image is displayed.

68