Canon HG10 FUNC, FUNC, NOTES, Repeat steps, [PRINT] and press, 3Press or to select, Erasing All Print Orders, 2Press FUNC., press or to, 3Press or to set the number of

Photos

3Press or to set the number of

copies desired and press . To cancel the print order, set the number of copies to 0.

4Repeat steps 1-3 to mark additional images with print orders or press FUNC. twice to close the menu.

Printing the Still Images Marked with Print Orders

FUNC.

( 26)

1Connect the camcorder to the printer using the supplied USB cable.

Refer to PC Connection Diagram

( 87).

2Press FUNC. , press or to

select the icon and press to open the setup menus.

3Press or to select[PRINT] and press .

•The print settings menu appears.

•The error message “SET PRINT ORDER” appears if you connect a printer with direct print function

and select [PRINT] without having set any print orders beforehand.

4Use the navigation buttons to

select [PRINT] and press . Printing starts. The print settings menu disappears when the printing is completed.

NOTES

•You can also use the control dial to navigate the FUNC. and setup menus.

•Depending on the connected printer, you can change some print settings

before step 4 ( 78).

•Cancel Printing/Printing Errors ( 80).

•Restarting Printing: Open the print settings menu as explained in steps 2-3 above. In the print settings menu, select

[RESUME]* and press . The remaining images will be printed. Printing cannot be restarted when the print order settings have been changed or if you deleted a still image with print order settings.

* In case the print order was interrupted after the first still image, this menu option will appear as [PRINT] instead.

Erasing All Print Orders

( 24)

FUNC.

( 26)

FUNC. MENU

STILL IMG OPER.

ERASE ALL ORD

FUNC. YES

82