Preparations

NOTES

About the LCD and viewfinder screen: The screens are produced using extremely high-precision manufacturing techniques, with more than 99.99% of the pixels operating to specification. Less than 0.01% of the pixels may occasionally misfire or appear as black, red, blue or green dots. This has no effect on the recorded image and does not constitute a malfunction.

LCD Backlight

You can set the brightness of the screen to normal or bright. Doing so changes the brightness of both the LCD and viewfinder screen.

Hold DISP. pressed down for more than 2 seconds.

Repeat this action to toggle between the normal and bright settings.

NOTES

This setting does not affect the brightness of the recording.

Using the bright setting will shorten the effective usage time of the battery pack.

Inserting and Removing a Memory Card

Only miniSD cards can be used with this camcorder.

1Turn off the camcorder.

2Open the LCD panel.

3Open the memory card slot cover.

4Insert the memory card straight with the miniSD label facing up, all the way into the memory card slot until it clicks.

5Close the cover.

Do not force the cover closed if the memory card is not correctly inserted.

TO REMOVE THE MEMORY CARD

First push the memory card once to release it, and then pull the card out.

30