Trimming
You can cut out a portion of a recorded image and save it as a new image file.
Choose [Trimming].
z Press the n button to choose [Trimming] from the 1tab, then press the m button.
| Choose an image. |
Trimming Area | z Press the qrbuttons to choose an image, |
then press the m button. |
Trimming Area Display
Recorded pixels after trimming
Adjust the trimming area.
XA frame will appear around the portion of the image to be trimmed.
XThe original image will display in the upper
left and the trimmed image will display in the lower right.
zIf you move the zoom lever, you can change the frame size.
zIf you press the opqr buttons, you can move the frame.
zIf you press the mbutton, you can change the frame orientation.
zPress the n button.
Save as a new image and display.
zFollow Steps 4 and 5 on p. 146.
•Images recorded at a pixel setting of 
(p. 62), or images resized to 
(p. 146) cannot be edited.
•Images that can be trimmed will have the same width and height ratio after trimming.
•The number of recorded pixels in a trimmed image will be smaller than before trimming.
•Movies cannot be edited.
147