Using an Eye-Fi Card

The power saving function does not work while transferring images (p. 52).

Choosing will interrupt the Eye-Fi connection. Choosing another Shooting mode or entering Playback mode will reopen the Eye-Fi connection, but movies made with the Movie Digest function may be retransferred.

Checking Connection Information

You can check the Eye-Fi card’s access point SSID, or connection status.

Choose [Connection info].

zPress the nbutton to choose [Eye-Fi Settings] from the 3 tab, then press the m button.

zPress the op buttons to choose

[Connection info], then press the m button.

XThe connection info screen will appear.

Disabling Eye-Fi Transfer

You can set the card to disable Eye-Fi transfer.

Choose [Disable] in [Eye-Fi trans.].

zPress the nbutton to choose [Eye-Fi Settings] from the 3 tab, then press the m button.

zPress the op buttons to choose [Eye-Fi trans.], then press the qr buttons to choose [Disable].

What if [Eye-Fi Settings] does not appear?

[Eye-Fi Settings] will only appear when an Eye-Fi card is inserted in the camera.

If the Eye-Fi card has a write-protect tab, you will not be able to check the card’s connection status, or set [Eye-Fi trans.] to [Disable] when the tab is in the locked position.

180