Canon L200 manual Setting Up Fax/Tel Mode

Receiving Both Faxes and Telephone Calls Automatically: Fax/Tel Mode (8-5)

Set this mode if you only have one telephone line for fax and telephone use and want your FAX to automatically switch between fax and voice calls.

For this mode, you need to connect the optional handset or a telephone to your FAX (→ p. 2-6).

Setting Up Fax/Tel Mode

Follow this procedure to set the receive mode to FAX/TEL AUTO SW (Fax/Tel Mode):

1Open the one-touch speed dial panel.

2Press Data Registration.

3Press Set.

4Use or to select RX SETTINGS.

5Press Set.

6Use or to select RX MODE.

7Press Set.

8Use or to select FAX/TEL AUTO SW.

9Press Set.

❏To set the options for FAX/TEL AUTO SW (Fax/Tel Mode), see the following pages.

10Press Stop to return to standby mode.

11Con®rm that FaxTel is displayed in the LCD.

DATA REGSTRATION

USER SETTINGS

RX SETTINGS

ECM RX

RX MODE

Ex:

FAX ONLY MODE

FAX/TEL AUTO SW

RING START TIME

Ex:

15:00 FaxTel

Ex:

15:00 FaxTel

❏If FaxTel is not displayed, press Receive Mode to select Fax/Tel Mode. After a few seconds, the LCD returns to standby mode.

The numbers in parentheses indicate the pages in the FAX-L280/L200 User's Guide on which you can ®nd	15
detailed information.