Canon MF4690 Connecting a Network Cable

To connect the network cable, follow the procedure below.

1. Remove the seal from 10Base-T/100Base-TX port on the back of the machine.

2. Connect one end of the Category 5 or greater twisted pair cable to 10Base-T/100Base-TX port. Connect the other end to the network router or hub.

Connecting a Network Cable

3. Turn on the main power switch.

That completes the connection of the network cable.

Please proceed to “Setting the IP Address,” (→ P. 14).

Contents

Page Legal Notices Introduction Contents What Can I Do with This Machine Useful Features of This Machine System Environment What Is the Scan to E-MailFeature What Is the Scan to USB Feature What Is the Scan to File Server Feature Setting Up the Send Feature Setting Up the Scan to E-MailFeature Setting Up the Scan to USB Feature Setting Up the Scan to File Server Feature Checking the Information Required for the Scan to E-MailFeature Checking the E-MailAccount Page Page Connecting a Network Cable Setting the IP Address Checking the Communication Page Using the Remote UI Setting Up the Remote UI Starting the Remote UI Using the Scan to E-MailFeature Setting Up the E-MailSend Feature Page Page Page Registering E-MailAddresses Page Sending E-Mails Page Checking If the E-MailIs Delivered Preparing to Receive E-Mails Receiving E-MailsUsing This Machine Before Using the Scan to USB Feature Storing a Scanned Document to Your USB Memory Page Page Page Troubleshooting Cannot Get Connected to a Network Sent the E-Mail,but It Is Not Delivered to the Recipient Forgot E-MailSettings CANON INC CANON U.S.A., INC CANON CANADA INC CANON EUROPA N.V CANON FRANCE S.A.S