Setting the IP Address

Setting the IP Address

2. Press [] or [] to select <SYSTEM SETTINGS>, then press [OK].

A D D . F U N C T I O N S

1 1 . S Y S T E M S E T T I N G S

3. Press [] or [] to select <NETWORK SETTINGS>, then press [OK].

S Y S T E M S E T T I N G S

5 . N E T W O R K S E T T I N G S

4. Press [] or [] to select <VIEW IP ADDRESS>, then press [OK].

N E T W O R K

S E T T I N G S

6 . V I E W

I P A D D R E S S

 

 

5. Press [] or [] to select <IP ADDRESS>, <SUBNET MASK>, or <GATEWAY ADDRESS>, then press [OK].

V I E W I P A D D R E S S 1 . I P A D D R E S S

If the machine is communicated with the network properly, the IP address, subnet mask and gateway address are displayed.

We recommend you to take a note of the IP address you confirmed here, because you need it for “Starting the Remote UI,” (P. 17).

6. Press [Stop/Reset] to return to the standby mode.

If they are not displayed, that indicates that the machine is not communicated with the network. Please check the setting of the IP address.

15