Setting up the Send Feature

Setting Up the Scan to USB Feature

To use the Scan to USB feature, settings such as the network connection are not required. For details on how to use this feature, see “Using the Scan to USB Feature,” (→ P. 30).

Setting Up the Scan to File Server Feature

To use the Scan to File Server feature, you need to set it up as described below.

After you complete the “Checking an IP Address” step, see the Reference Guide that came with this machine to continue the setup.

Connecting a Network Cable (→ P. 13)

You connect the machine to the network environment.

Setting the IP Address (→ P. 14)

You make sure the correct IP address is set.

Setting up This Machine

You set up this machine to use the Scan to File Server feature. For details on the setup procedure, see

“Settings from the Operation Panel,” (→ P. 6‑21) of “Setting Up a Computer as a File Server,” in Chapter 6, “Network,” in the Reference Guide.

Setting up the Computer and Registering the Destination

You set up the computer to which you want to store a scanned document and register the destination.

For details on the setup procedure, see “Configuring a Shared Folder,” (→ P. 6‑23) of “Setting Up a Computer as a File Server,” in Chapter 6, “Network,” in the Reference Guide.

●Setup and confirmation on the computer

–Confirming if the functions required for setting up the shared folder are installed

–Setting up the shared folder

●Setup from this machine

–Registering the destination (file server)

Using the File Server Feature

You can operate the Scan to File Server feature in the same way as the Scan to E-mail feature.

See “Sending E-Mails,” (→ P. 25) and test the feature.

The setup is completed.

Feature Send the Up Setting