2 Prepare to load paper. | (1) | |
(1) | Open the Paper Support, then pull out the |
|
| Paper Support Extension. |
|
(2) | Open the Paper Output Tray. |
|
(3)Open the Output Tray Extension.
(4) Adjust the position of the Paper Thickness |
|
|
Lever. |
|
|
Set it to the right when printing on envelopes |
|
|
or | (4) | (3) (2) |
any other type of paper. See “Paper Handling” |
on page 8.
Note
If the corners or edges of the paper are smudged, try to print with the Paper Thickness Lever set to the right. It may improve print quality.
Reset the Paper Thickness Lever to the left when you finish printing.
For details on the Paper Thickness Lever, refer to “Inside” in “Main Components” of the User’s Guide
3 Load the paper. | (1) | |
(1) | Load the paper in the Rear Tray with the print | (A) |
| side facing UP. |
|
(2) | Align the paper stack against the right side of | (2) |
| the Rear Tray. |
|
(3) | Pinch the Paper Guide and slide it against the | (3) |
| left side of the paper stack. | |
|
| |
|
| * Do not load higher than the Load Limit |
|
| Mark (A). |
4 Specify the page size and media type settings according to the loaded paper.
Note
zWhen performing copy direct printing without using a computer, select the size and type of the loaded paper using the Operation Panel.
For details on settings, see “Making Copies” on page 15.
zWhen using the machine connected to a computer, select the size and type of the loaded paper in Page Size (or Paper Size) and Media Type in the printer driver.
For details on printer driver settings, see “Printing with Windows” on page 17 or “Printing with Macintosh” on page 18.
Before Using the Machine | 11 |