Canon MP210 Series Print Head Cleaning

Print Head Cleaning

Clean the Print Head if lines are missing or if white streaks appear in the printed nozzle check pattern. Cleaning unclogs the nozzles and restores the print head condition. Note that cleaning the Print Head causes used ink to be absorbed in the ink absorber. Cleaning the Print Head consumes ink, so perform Print Head Cleaning only when necessary.

1

2

Make sure that the machine is turned on.

Start Print Head Cleaning.

(1)Press the Maintenance button repeatedly until H appears.

(2)Press the Black or Color button. Print Head Cleaning starts.

Do not perform any other operations until Print Head Cleaning finishes. This takes about one minute.

3 Confirm the condition of the Print Head.

When Print Head Cleaning finishes, the LED returns to the standby mode. Print the nozzle check pattern to check the print head condition.

See “Printing the Nozzle Check Pattern” on page 27.

Note

If the problem is not resolved after performing Print Head Cleaning twice, try Print Head Deep Cleaning. See “Print Head Deep Cleaning” on page 30.

Routine Maintenance 29