Note
If it is difficult to pick the best pattern, pick the setting that produces the least noticeable white streaks.
(A)(B)
(C)(D)
(A)Less noticeable vertical white streaks
(B)More noticeable vertical white streaks
(C)Less noticeable horizontal white streaks
(D)More noticeable horizontal white streaks
(2)Repeat the procedure until you finish selecting the pattern number for column L.
(3)Place the Print Head Alignment Sheet
When placing the Print Head Alignment Sheet, place the front side down and align the upper left corner of it with the alignment mark as shown in the figure below.
(4)Make sure that U is displayed on the LED, then press the Black or Color button.
The Print Head Alignment Sheet is scanned and the print head is aligned automatically.
Note
zIf adjustment is not done successfully, the error code is displayed on the LED. In this case, start over from step 1 to print a new Print Head Alignment Sheet. For details, see “An Error Code Is Displayed on the LED” on page 44.
zIf the results of Automatic Print Head Alignment are not satisfactory, perform Manual Print Head Alignment. For details, refer to “Aligning Print Head on the Computer” in the User’s Guide
zTo adjust columns M to R, you need to perform the print head alignment on your computer. For details, refer to “Aligning Print Head on the Computer” in the User’s Guide
32Routine Maintenance