Recording Still Images on a Memory Card
2
3
1
4 
E
You can record still images onto a memory card. In addition to the still images you record directly onto the memory card, you can record images from a tape in the camcorder, or images input via the DV terminal or AV terminal onto the memory card.
Cautions:
•When you are using an SD Memory Card, make sure the protect switch is set to allow recording.
•While the card access indicator flashes, do not turn off the camcorder, disconnect the power source or remove the memory card. Doing so could result in data damage.
Note:
•Make sure a memory card with enough memory available is inserted into the camcorder.
Recording with the Camcorder
CAMERA | PLAY (VCR) CARD CAMERA CARD PLAY (VCR) |
1.Press and hold the small button on the POWER switch and turn the POWER switch to CAMERA.
2.Move the TAPE/CARD switch to CARD.
•The number of images that can still be recorded on the memory card, and other information appear in the display.
•The camcorder will turn itself off if you are using a battery and do not operate the camcorder for more than 5 minutes. Set the POWER switch to OFF and then back to CAMERA.
3.Press the PHOTO button halfway and hold it.
•Exposure is locked.
•During autofocus F flashes white in the display as the camcorder adjust the focus and it is displayed continuously as a green mark when the camcorder is ready to take the still image.
Using a Memory Card
