Printing with the Direct Print Function

E

Using a Memory Card

You can print still images by connecting the camcorder to a printer with Direct Print function. The Direct Print function can also be used with the print mark settings ( 120).

Cautions:

Observe the following precautions during printing, otherwise printing may not be performed correctly.

-Do not turn off the camcorder or the printer.

-Do not change the position of the TAPE/CARD switch.

-Do not detach the cable.

-Do not remove the memory card.

Still images not recorded with this camcorder may not be printed correctly on a printer with direct print function.

Notes:

The direct print function is supported by the Canon Card Photo Printer CP-10 and Canon Bubble Jet Printers with the logo (as of march 2003).

Refer to the instruction manual of each printer for information on which interface cable to use with the camcorder.

The Card Photo Printer CP-10 is supplied with two direct interface cables. Use the cable with the USB logo on the connector (DIF-100).

We recommend powering the camcorder from a household power source.

Refer also to the instruction manual of the respective printer.

Up to 99 copies per still image and up to 200 still images per memory card can be selected on the camcorder ( 120).

The screenshots in this section are examples taken from a printer with direct print function. Options for the [Style] category will differ slightly depending on the printer.

Connecting the Printer to the Camcorder

Printer with Direct Print Function

1.Turn off the camcorder and insert a memory card that contains

128 still images.

Page 128
Image 128
Canon MV6iMC instruction manual Printing with the Direct Print Function, Connecting the Printer to the Camcorder