Built-in speaker

E

The camcorder has a built-in speaker so you can review the sound track alongside the picture when you’re using the LCD screen to play back. The built-in speaker is monaural.

Mastering the Basics

CAMERA

PLAY (VCR) CARD CAMERA CARD PLAY (VCR)

Adjust the speaker volume by turning the selector dial.

Turn the selector dial up to increase the volume, and down to lower the volume.

A bar appears in the display to indicate the current volume. It disappears in 4 seconds.

You can turn off the volume completely by turning the selector dial down until OFF appears.

Notes:

Sometimes audio may sound distorted when the volume is turned up high. If this happens, turn down the volume.

The speaker does not sound if PHONES is displayed. Set AV/headphones to AV ( 32).

Using the headphones

• You can also use the headphones to monitor the sound track. Change the setting of the AV/headphones terminal through the menu ( 32).

You can adjust the headphone volume separately from the built-in speaker.

The levels you adjust for the built-in speaker and headphones are memorized separately. The camcorder remembers your levels even if you turn the camcorder off and back on again.

The speaker turns off when you use headphones.

31

Page 31
Image 31
Canon MV6iMC instruction manual Built-in speaker, Using the headphones