CHAPTER 4 IMAGE FORMATION SYSTEM
4–40
COPYRIGHT
©
1998 CANON INC. CANON NP7161/NP7160 REV.0 AUG. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
[15]
[17] [18]
[16]
Figure 4-333
9) Remove the two mounting screws [15];
then, remove the bearing holder (rear)
[16], bearing [17], and developing roll
[18].
Figure 4-334
[19]
10)Remove the developing cylinder [19].
Caution
Do not leave fingerprints or oils on
the surface of the developing cylinder.
As necessary, dry wipe the surface
with lint-free paper.