COPYRIGHT
©
1998 CANON INC. CANON NP7161/NP7160 REV.0 AUG. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
6–13
CHAPTER 6 FIXING SYSTEM
Figure 6-218
[2]
[3]
Figure 6-217
[1]
[2]
[1]
[3]
[5]
[4]
[6]
Figure 6-220
[8]
[7]
[9]
[10]
Figure 6-219
4) Remove the mounting screw [2].
5) Free the harness from the harness guide,
and remove the sub thermistor [3].
8. Removing the Fixing Upper Roller
1) Remove the fixing heater. (See p. 6-10.)
2) Remove the upper delivery assembly.
(See p. 6-16.)
3) Remove the lower delivery assembly (See
p. 6-17.)
4) Remove the three mounting screws [1],
and remove the fixing upper inlet guide
assembly [2].
5) Remove the double gear [3] and the C-
ring [4]; then, detach the gear [5] and the
bushing [6].
6) Remove the C-ring [7], and detach the
gear [8] and the bushing [9].
7) Remove the fixing upper roller [10].