CHAPTER 5 PICK-UP/FEEDING SYSTEM
5–22
COPYRIGHT
©
1998 CANON INC. CANON NP7161/NP7160 REV.0 AUG. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
Figure 5-621
[2]
[B]
[A]
[1]
[5] [4]
[2]
[3]
Figure 5-620
Figure 5-619
5) Detach the multifeeder separation pad [5]
from the holder [4].
5. Adjusting the Pressure of the
Separation Pad
If double feeding or pick-up failure
occurs, loosen the adjusting screw [1] and
relocate the holder [2] to adjust the force of
the separation pad tension spring.
• If pick-up failure occurs, move the holder in
the direction of [A].
• If double feeding occurs, move the holder
in the direction of [B].
2) Turn off the copier, and disconnect the
power plug.
Caution:
Whenever you need to perform
disassembly/assembly work, be sure
to turn off the copier and disconnect
its power plug.
3) Open the right door.
4) Remove the mounting screw [2], and slide
the multifeeder separation pad assembly
[3] in the direction of the arrow to
remove.