Getting Started

1

Transporting the

Copier

12

Transporting the Copier

Please observe the following precautions when transporting this copier.

Before moving the copier, always turn the power OFF and unplug the copier from its power source.

Before moving the copier, be sure to disconnect the power cord from the copier.

If the copier will be subjected to any vibrations (e.g., when transporting long distances), remove the cartridge from the copier.

Before operating the copier again after it has been moved, slide the platen all the way to the right and then back to the center position by hand.

Carrying the Copier by the Carrying Handle

Fold the trays up as shown in the illustration, and insert the trays into the opening between the disc and the platen cover. Then pull out the carrying handle. (See “Parts and Their Functions”,

on p. 15.)

Firmly grip the carrying handle. Slowly tilt the copier upward. Then lift the copier.

When the unit is tilted the platen will automatically lock into place.

Page 14
Image 14
Canon PC 140 manual Transporting the Copier, Carrying the Copier by the Carrying Handle, On p