REQUEST:

Make sure that the trays are set correctly under the disc on the platen cover.

Double check to make sure the trays are set correctly under the disc on the platen cover.

If transporting the copier over a long distance secure the platen cover with packing tape and remove the cartridge. (See p.14.)

When transporting the copier take extra care not to subject it to vibrations or shock.

If you need to set the copier down for a while, place it upright on a flat level surface with the carrying handle on top.

When lowering the copier to a horizontal position (installation position), do so slowly.

Carrying the Copier by the Sides

Secure the platen with packing tape.

Push in the carrying handle. Then fold up the trays.

Insert the trays into the opening between the disc and the platen cover.

Standing behind the copier as shown in the illustration, firmly grasp the front and rear sides of the copier and lift.

REQUEST:

Do not attempt to use the paper feeding slot, exit slot, multi-stack tray or the copy tray as handles. Attempting to carry the copier by holding one of these may cause it to break off, and thus cause the handler to drop and damage the copier.

Getting Started

1

Transporting the

Copier

13

Page 15
Image 15
Canon PC 140 manual Carrying the Copier by the Sides