Position the second original onto the platen glass so that the top edge is to the left.

ABC

1 2 3

Turn the copy of the first original over as shown. Then, place it into the multi-stack tray again.

1 2 3

ABC

Make a copy of the second original.

NOTICE:

16 to 32-lb bond paper can be used when making two-sided copies.

If the copy paper becomes curled during the first copy pass, smooth it flat before proceeding with the second copy.

MEMO:

If several sheets are placed into the multi-stack tray during two-sided copying, the leading edge of the back sides of the paper can become smeared with toner. If this occurs, place the paper one sheet at a time into the multi-stack tray.

Copying Thick Books or Large Originals

When copying thick books, large originals or three-dimensional objects, detach the platen cover as explained below to make it easier.

Grip the platen cover gently with both hands, as shown in the illustration, and lift it about 1/4” upwards.

Operating Procedure

2

Various Ways to Copy

37

Page 39
Image 39
Canon PC 140 manual Copying Thick Books or Large Originals, Make a copy of the second original