Storingoring Cartridgesrtridges, About the Cartridge | Canon PC 140

Rock the cartridge several times to the right and left at a 90° to evenly distribute the toner within the cartridge.

Remove the cartridge sealing tape. (See “Replacing Cartridges”, on p. 21.)

Insert the cartridge into the copier.

Close the top cover by pressing down firmly on the button.

Return the platen to the center position.

Plug the power cord into an electrical outlet.

WARNING:

•This copier is only designed for use with the power source shown on the marking label located on the back of the copier. If you are unsure of the power source, check with your local power company.

NOTICE:

•If the copier is brought in from a cold place to a warm one, or if the location of the copier should be rapidly heated, condensation will form inside the copier. This may adversely affect the quality of the copy images (e.g., blacked-out copies).

When the copier is exposed to such conditions, allow at least two hours for the copier to adjust to room temperature before attempting to operate it.

Replacingplacing andand

Storingoring

Cartridgesrtridges

About the Cartridge

The cartridges for use in this copier are the Canon Cartridge E20 (Black) or the Canon Cartridge E (in Red, Blue, Green or Sepia) is also available. Each cartridge is a consumable item and should be replaced when the toner runs out.

Getting Started

1

Replacing and

Storing Cartridges

19

Image 21

Canon PC 140 manual Storingoring Cartridgesrtridges, About the Cartridge

Contents

Operators Manual Preface Symbols Used in This Operator’s Manual Important Safety InstructionsPage Table of Contents Transparencies Power Cord Supplies & AccessoriesTelephone Assistance USA Canon Information Center in Canada 1Gettinging StartedStarted Safety Considerations InstallationPower Supply Handling Maintenance and Inspection Consumables Handling Precautions Installation Precautions Transporting the Copier Carrying the Copier by the Carrying HandleOn p Carrying the Copier by the Sides Transporting Copier by Car Main Unit Parts and Their Functions Top Cover Control Panel Error indications Installing the Copier Checking the Package ContentsInstallation Procedure About the Cartridge Storingoring Cartridgesrtridges Test your cartridge before replacing it When to Replace the Cartridge Replacing Cartridges Approximate copy yieldSlide the platen to the left until the mark is exposed Getting Started Cartridge Handling Precautions Recycling used cartridges Cartridge Storing Precautions Canon Cartridge Recycling Program Clean Earth Campaign Maximum weight = 70 pounds Maximum Option B Volume Box ReturnOption a Single Box Return Option C Multiple Box Return Option a UPS Pick-up Residents of Alaska and HawaiiOption B UPS Drop off OK-CANON Canada Program Option B Volume Box Return 8 or more cartridges Operating ing Procedure Procedure Normal CopyingVarious Ways to Copy Turn the copier’s power switch on Normal CopyingPress the key Making 10 or more Continuous Copies The F Mode Adjusting the Copy Exposure Adjustment using exposure recalibration switchPositioning Originals Press the key to switch to manual exposure control mode Adjusting the copy exposure manually About Copy Stock Setting copy paperSuitable copy stock Unsuitable copy stock Postcards Transparencies* Other Stock Various Ways to Copy Making Two-sided Copies If transparencies do not feed smoothlyPosition the first original onto the platen glass Make a copy of the second original Copying Thick Books or Large Originals Making Two-color Copies Key ABC Memo When Error Indicators Appear Troubleshootingbleshooting When Flashes When Error Indicators Appear When Letters or Numbers Light Up / Flash Clearing Paper Jams When Flashes Removing jammed paper Align the platen with the mark by sliding it to the left Cleaning the Paper Roller When the Error Indicator flashes Troubleshooting Copier will not operate What to Do If You Suspect There is a MalfunctionDuring copying No copy image appears on copies White streaks appear on copies Paper jams occur frequentlyBlack streaks appear on copies Copies are completely black Cleaning the fiber lens top side Copy Image ProblemsIf Light Bands/ White Streaks Appear on Copies If Dark Bands/ Black Streaks Appear on Copies Cleaning the fiber lens reverse side Troubleshooting Ppendix dix Cleaning the Copier Routine Cleaning Specifications Cleaning the Copier Clean the external housing of the copier in the same way Routine Cleaning Specifications Index Auto Indicator 17, 43