l Shooting/Viewing Images on a TV set

You can use a video-compatible television as a monitor to shoot or play back images when it is connected to the camera with the

supplied Stereo/Video Cable STV-250N.

1 Turn off the camera and the TV.

N

u Connect the StereoNideo Cable to the camera's AN OUT terminal.

eWith your fingernail on the left edge of the camera's DIGITAL terminal cover, pull it forward to open it, and plug the Stereo/Video Cable in all the way.

3Plug the other ends of the StereoNideo Cable into the VIDEO IN and AUDIO IN jacks on the TV.

To the Video IN Jack

Plug (Yellow)

;__

_

To the Audio IN Jack

 

 

Plug (Left) (White)

. To the Audio IN Jack

Plug (Right) (Red)

4 Turn on the TV and switch it to Video mode.

5Power on the camera.

ohe video output signal can be switched (NTSC or PAL) to accommodate different regional standards (p. 32). The

default setting varies between regions.

-NTSC: Japan, U.S.A., Canada, Taiwan and others

-PAL: Europe, Asia (excluding Taiwan), Oceania and others

If the video system is set incorrectly, the camera output may not display properly.

Page 118
Image 118
Canon S31S appendix Power on the camera, Turn on the TV and switch it to Video mode