P Tv Av M

You can freely select camera settings such as the shutter speed and aperture value to suit your shooting purposes. After settings are

made, shooting procedures are the same as for _ Auto Mode (Basic Guide p. 6).

eor information on the relation between the aperture value

and shutter speed see p. 58.

Please note that camera shake becomes a factor at low shutter speeds and with larger aperture values. If _, (camera shake warning) appears in the LCD monitor (or viewfinder), try the following steps to resolve the problem.

-Use the _) (image stabilizer) function.

-Raise the ISO speed.

-Raise the flash to enable firing.

-Use a tripod.

P Program AE

o

Use the program AE mode to have the camera automatically set the

 

shutter speed and aperture value to match the brightness of the

E

scene.

When a correct exposure cannot be obtained, the shutter speed and aperture values are shown in red on the LCD monitor when the

button is pressed halfway. Use the following shooting methods obtain the correct exposure and make them show in white.

-Use the flash (raise the flash).

-Adjust the ISO Speed.

-Change the metering mode.

You can change the combinations of shutter speeds and aperture values without altering the exposure (p. 70).

57

Page 59
Image 59
Canon S31S appendix Tv Av M, Program AE