Xerox 721P83071 manual LPS specifications, Equipment dimensions, Clearance requirements

4635 LPS OVERVIEW

4635 LPS specifications

Listed below are specifications for the 4635. For more information on 4635 installation planning and specifications, refer to the Xerox 4635 LPS Installation Planning Guide.

Equipment dimensions

Hardware	Width	Depth	Height	Weight
System controller	24 in./610 mm	28 in./712 mm	38.2 in./970 mm	300 lbs./136 kg
Ðwith optional
peripheral	48 in./1219 mm	28 in./712 mm	38.2 in./970 mm	616 lbs./280 kg
cabinet (fully loaded)
Printer
Ðwith monitor and two	151.2 in./3842 mm	35.9 in./711 mm	59.6 in./1513 mm	2588 lbs./1174.9 kg
feeder/stacker
modules
Ðwith monitor, two	170.2 in./4324 mm	35.9 in./711 mm	59.75 in./1518 mm	2768 lbs./1255.6 kg
feeder/stacker
modules, and
optional bypass
transport
Ðwith monitor and	183.5 in./4661 mm	35.9 in./711 mm	59.6 in./1513 mm	3109 lbs./1411.9 kg
three feeder/
stacker modules
(one optional)
Ðwith monitor and	215.8 in./5480 mm	35.9 in./711 mm	59.6 in./1513 mm	3630 lbs./1648.9 kg
four feeder/ stacker
modules (two
optional)

Clearance requirements

Printer Requires 36 inch/914 mm clearance on each side. 50 inches/1270 mm required at front of printer.

System controller Requires 36 inch/914 mm clearance on each side.

Finishers and bulk feeders Finishers and bulk feeders attached to your bypass transport require 36 inch/914 mm clearance on each side.

Environmental requirements

Operating temperature 74° F ± 4° F/24° C ± 4° C (recommended) 54° - 85° F/14° - 29° C (min-max)

Humidity 45% ± 10% (recommended) 15-85% (min-max)

1-6 XEROX 4635 LASER PRINTING SYSTEM PRODUCT REFERENCE