Standard Installation

Standard installation is when you select an existing printer port manually.

You can also install a network printer or set up a shared printer by following the procedure below.

NOTE

If you are using a printer connected to a network using TCP/IP protocol, you can automatically search for a port to install the printer driver. For instructions, see "Dynamic Installation," on p. 2-10.

1 Insert the Printer Driver Software CD-ROM into the CD-ROM drive.

2 Double-click the [My Computer] icon ➞ the CD-ROM drive icon.

3 Double-click the following folders: [UFRII] ➞ [uk_eng].

4 Double-click the [Setup.exe] icon to start the installation process.

5 In the first dialog box of the UFR II Printer Driver Setup Wizard, click [Next].

2

Getting Started

Installing the Software

2-3