2

Getting Started

Configuring the Device Function Settings

If you cannot set up the printer configuration automatically (see "Configuring Automatically," on p. 2-39),you can enable the device functions manually, according to your needs.

NOTE

For the iR C2570, iR 2570C, iR C3170, iR 3170C, iR105+, iR2230, iR2830, iR2870/2270, iR3530, iR4570/3570, iR8070, iR85+, and iR9070, the available functions vary depending on the version of the controller for your printer. The controller version must be configured in order to use the supported functions.

Configuring the Controller Version

1 Print the Configuration Page.

❑On the printer control panel, press (Additional Functions).

❑Press [Report Settings] ➞ [Printer] under <Print List>.

❑Press [UFR II] ➞ [Configuration Page] ➞ [Yes].

NOTE

The procedure of printing the Configuration Page differs depending on the model of the printer you are using.

2 Confirm the Controller Function ID and Function Version printed on the Configuration Page.

3 On the [Start] menu, point to [Settings] ➞ click [Printers].

NOTE

•If you are using Windows XP Professional/Server 2003, on the [Start] menu, click [Printers and Faxes].

•If you are using Windows XP Home Edition, on the [Start] menu, click [Control Panel] ➞[Printers and Other Hardware] ➞[Printers and Faxes].

4 In the [Printers] folder, right-click the printer icon for your printer ➞ click [Properties].

2-44Configuring the Device Function Settings