2
Getting Started
Plug and Play Installation (Windows XP/Server 2003)
NOTE
In the following procedure, an operation screen for Windows XP is used; the screen might differ depending on your operating system.
1 Connect the cable from the printer's USB port to the PC's USB port, and then turn the printer ON.
2 Start Windows, and then insert the Printer Driver Software
The Found New Hardware Wizard starts.
3 Confirm that [Install the software automatically (Recommended)] is selected ➞ click [Next].
Windows searches for the driver automatically, and then starts the installation.
4 Click [Finish] after the files are copied.
The USB driver and the printer driver are now installed.