Playback
Playback Controls
When you play back a clip, operate the buttons on the camcorder or the wireless controller to use fast playback, play back
114clips. Refer to the following table.
Available Playback Types
Playback type | Operation | |
| Camcorder: Press the Jor Ibutton. | |
Fast playback | Wireless controller: Press the Jor Ibutton. | |
Repeat to increase the playback speed to approximately 5x J | ||
| ||
| 15x J 60x the normal speed. | |
|
| |
Frame advance/reverse | Wireless controller: Press the Zor Ybutton (during | |
playback pause). | ||
| ||
|
| |
Skip to the beginning of | Camcorder: Press the Kbutton. | |
the next clip | Wireless controller: Press the gbutton. | |
|
| |
Skip to the beginning of | Camcorder: Press the Lbutton. | |
the current clip | Wireless controller: Press the fbutton. | |
|
| |
Skip to the previous clip | Camcorder: Press the Lbutton twice. | |
Wireless controller: Press the fbutton twice. | ||
| ||
|
| |
Return to playback mode | Camcorder: Press the Dbutton. | |
Wireless controller: Press the Dbutton. | ||
| ||
|
|
NOTES
•There is no audio during any of the playback types listed in the previous table.
•During some special playback modes, you may notice some anomalies (blocky video artifacts, banding, etc.) in the playback picture.
•During frame advance, playback advances 0.2 seconds when the resolution/frame rate is 1280x720/24P or 1280x720/60P and 0.5 seconds for other configurations.
•The speed indicated on the screen is approximate.
Adjusting the Volume
During playback, audio will come from the monaural
Adjusting the Headphone Volume
Follow the procedure below to adjust the headphone volume. Alternatively, you can adjust the volume using the CUSTOM dial (047).
1Open the [Headphone Volume] submenu.
[mAudio Setup] 
[Audio Output] 
[Headphone Volume]
2Select the desired level and then press SET.
• Select [Off] to mute the audio.
[mAudio Setup]
[Audio Output]
[Headphone Volume]
[8]