Zooming
Setting the Zoom Speed
Perform the following procedure to set the zoom speed for the supplied wireless controller. Refer to the following table for a summary of zoom
66speeds when using the wireless controller or other remote controls.
1Open the zoom [Speed Level] submenu.
[lCamera Setup] 
[Zoom] 
[Speed Level]
2Select [Fast], [Normal] or [Slow] and then press SET.
3 Open the zoom [Wireless Controller] submenu.
[lCamera Setup] 
[Zoom] 
[Wireless Controller]
4 Select the desired level and then press SET.
•This setting affects both the wireless controller and optional remote controls.
Zoom speeds
Accessory | Zoom speed |
|
|
[lCamera Setup]
[Zoom]
[Speed Level]
[Normal]
[lCamera Setup]
[Zoom]
[Wireless Controller 8]
Wireless controller (supplied)
Constant zoom speed that is selected from the menu.
Remote control without variable zoom speed
control (commercially available)
Constant zoom speed.
Remote control with variable zoom speed control
(optional
Based on zoom speed setting of the
Controller, etc.)
remote control.
Soft Zoom Control
Soft zoom control allows you to start and/or stop the zoom gradually.
1 Open the [Soft Zoom Control] submenu.
[lCamera Setup] 
[Zoom] 
[Soft Zoom Control]
2 Select the desired option and then press SET.
Options |
|
[Both]: | Zoom starts and stops gradually. |
[Stop]: | Zoom stops gradually. |
[Start]: | Zoom starts gradually. |
[Off]: | Use this setting if you do not intend to use soft zoom control. |
[lCamera Setup]
[Zoom]
[Soft Zoom Control]
[Off]